Table of Contents
Advertisement
This User's Guide has been written mainly with the information specific to this computer, assuming that the user is able to perform basic Windows
operation and understands how to use help in its installed applications to resolve problems. In this user's manual, unless specified, "Windows 7"
®
refers to Windows
7 Professional 32 bit with Service Pack 1 (SP1) installed. Configuration and application installation should be conducted by a
user who has administrator privileges. If a [User Account Control] screen comes up, please be sure to confirm the contents before continuing.
The information contained within this manual applies to the following models:
• VB Model: VC26M/BC-F, VG26M/BC-F
1
Checking Included Accessories .............................................2
2
Connecting Included Accessories ..........................................2
3
Windows Setup ......................................................................3
4
Knowing the Parts ..................................................................6
1
5
Battery ....................................................................................8
6
Keyboard ................................................................................9
7
The NX Pad............................................................................9
8
Display switch tool................................................................10
Note: The illustrations, screenshots, icons, and on-screen text shown in this document may differ from the ones you actually encounter.
User's Guide
VB Model
9
LAN Function....................................................................... 11
10
Wireless LAN Function ........................................................ 12
11
Memory ............................................................................... 14
12
System Configuration .......................................................... 15
13
Security Chip Function ........................................................ 17
Applications ......................................................................... 18
Recovery ............................................................................. 21
Appendix ............................................................................. 23
Advertisement
Table of Contents
Related Manuals for NEC VersaPro VB VC26M/BC-F
Summary of Contents for NEC VersaPro VB VC26M/BC-F
-
Page 1: Table Of Contents
User's Guide VB Model This User's Guide has been written mainly with the information specific to this computer, assuming that the user is able to perform basic Windows operation and understands how to use help in its installed applications to resolve problems. In this user's manual, unless specified, "Windows 7" ®... -
Page 2: Checking Included Accessories
Failure to do so may cause damage. • Connect the LAN cable, only after completing Windows setup and firewall NEC软件的使用条件 【即EULA】(对顾客的特别提示) configuration. Or, turn on the wireless LAN. (请务必先仔细阅读如下内容后，决定是否打开本个人电脑的包装) This ensures that your computer can be safely connected to a network. -
Page 3: Windows Setup
Turning on the power Windows Setup When you first power up your new computer, it is necessary to perform Windows If the AC adapter is not properly connected, the power is not turned on by pressing the setup. power switch when you first turn the power on. Check that the AC adapter is connected again. - Page 4 Enter a user account password when prompted and click [Next] to If you encounter problems during setup continue. Please check the contents when the [Please read the license terms] page is The setup screen is not displayed displayed. When [Press F2 to Enter BIOS Setup] is displayed on the screen when you turn the After checking the contents, check [I accept the license terms] and click power on, please carry out the following procedure.
- Page 5 • It is possible to change the drive letter if necessary. Using and configuring your computer after setup is complete • Depending on the system environment, there may be some cases where [Shrink Volume] is not possible. For more information about [Shrink Volume], Creating multiple hard disk partitions please refer to [Shrink a Basic Volume] in the [Computer Management] help file.
-
Page 6: Knowing The Parts
Explanation of Components Knowing the Parts Number Name Explanation LCD display This is the computer's display. Names and descriptions of your computer's major components Status LEDs These indicate various states of the computer. This is used to turn the computer on/off or change ... - Page 7 Number Name Explanation Status LEDs (20) Wireless switch This switch turns wireless LAN functionality on Power LED and off. LED state Computer State (21) Optical drive (models Some models have an internal DVD SuperMulti Blue Computer power on with optical drives only) Drive.
-
Page 8: Battery
Caps lock indicator LED Battery LED state Computer State On (Green) <Caps Lock> is on (All letters are entered as capital letters) <Caps Lock> is off (All text input is lowercase letters) Never touch the battery slot terminals. It may cause contact failure. ... -
Page 9: Keyboard
Keyboard The NX Pad This section covers the NX pad usage and extended feature settings, as well as the Using the keys driver update process. Using NX Pad Hotkeys (Using <Fn>) When settings are at the factory default values, the following operations can be By pressing the function key <Fn>... -
Page 10: Display Switch Tool
Tapping a fingertip against the pad results in a click. Quickly tapping the pad twice Display switch tool results in a double-click. Tapping the pad to produce a click or double-click is called "tapping" or "double tapping". If you tap the pad with the pointer aligned on the target, and then touch the pad again and move your finger, this operation will result in a drag. -
Page 11: Lan Function
Changing the screen resolution LAN Function Please refer to the following procedure to change the screen resolution with the keyboard. This section covers important points and the correct procedure for setting up the LAN (Local Area Network) function. • Unless the screen output is set to clone mode with the external display connected to LAN settings the external display output, the resolution cannot be changed. -
Page 12: Wireless Lan Function
Configuring the BIOS setup utility to enable network booting. Turn the power on and immediately press <F2> several times. • In order to enable WoL, it is necessary to install special software on the The BIOS setup utility will then be displayed. administrator's PC to allow sending of Magic Packets. - Page 13 Installing PROSet/Wireless Configuring the wireless LAN By using PROSet/Wireless with your computer's wireless LAN, it is possible to use authentication functions (LEAP, etc.) that do not have native Windows support. • The wireless LAN functionality can be configured with the [Power Management] tab in Driver properties.
-
Page 14: Memory
Uninstalling PROSet/Wireless Memory PROSet/Wireless can be uninstalled with the following steps. Start Windows. Installing memory Click [Start] and then [All Programs] [Accessories] [Run]. Enter the following in the [Open] dialog and then click [OK]. Remove the battery pack. C:\DRV\WLINSEV\UTILITY\APPS\Setup.exe/qn/x/forcerestart Use a Phillips screwdriver to remove the screws shown in the diagram below. -
Page 15: System Configuration
Return the memory slot cover to its original position and reinsert the System Configuration screws into the bottom of the unit. Your new memory should now be ready to use. The BIOS setup utility Please refer to the following diagram when removing memory. Do not turn your computer off with the power switch while in the BIOS setup utility. - Page 16 Select [Intel(R) ME BIOS Extension] and then set it to [Enabled]. Restoring default factory setting values Press the <F10> key. Please follow these steps to restore your system to the default factory settings. [Save configuration and reset?] should be displayed. Enter the BIOS setup utility.
-
Page 17: Security Chip Function
Enter the BIOS setup utility. Please refer to the following procedures for security chip initialization. Under [Intel Feature Configuration] in the [Advanced] menu, set [Intel(R) Turn the power on and immediately press <F2> several times. ME BIOS Extension] to [Enabled]. The BIOS setup utility will then be displayed. -
Page 18: Applications
If a confirmation screen is displayed after the computer restarts, press Battery tool <F10>. The settings are saved and the computer restarts. By using the "Battery tool", you can automatically perform battery refresh, The features of the security chip are now enabled. performance diagnostics and battery refresh diagnostics. - Page 19 Deletes data from the hard disk in a method compliant to the U.S. Department of Defense NSA Standard. The data is deleted effectively by writing random data 1, If the [Battery tool Files in Use] screen is displayed, click [NEC Battery Refresh Utility-Scheduler (Process Id: XXXX)], and then click [Continue].
- Page 20 Turn on the computer. Precautions If the power lamp lights, quickly insert the "Recovery Disc" into the optical • HDD anti-shock tool will reduce the risk of damage to the hard disk when the drive. computer detects that it has been tilted, dropped, or otherwise moved abruptly by When [Press any key to boot from CD or DVD...] is displayed, press <Enter>.
-
Page 21: Recovery
Precautions during Recovery Recovery Follow the following precautions during recovery. Follow the steps in the manual and on the recovery screen Recovery Basics During recovery, be sure to follow the steps in this manual and on the recovery Here we will explain the basics before recovery. Please read this before performing screen. - Page 22 Turn on the computer. Read " Windows Setup" (p.3) and perform Windows Setup. When the [NEC] logo screen is displayed, repeatedly press <F11> until the [NEC] logo screen disappears and [Windows is loading files...] is displayed. When Windows setup has completed, turn the power OFF and then do settings to your needs.
-
Page 23: Appendix
After Recovery Appendix The applications which you installed from Application Disc or by any other way can not be recovered. Reinstall them if needed. Specifications Depending on your usage environment, the drive letter or the path assigned before recovery might be different. In that case, change the allocation. Model name VC26M/BC-F VG26M/BC-F... - Page 24 In the event that the product is used for the above facilities and/or equipment or in control systems, etc. where personal injury and/or property damage is caused, NEC assumes no responsibility.