Peripheral Configuration - NEC N8100-1056F User Manual

Peripheral Configuration

IMPORTANT:
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option
Serial Port A
Base I/O address
Interrupt
Serial Port B
Base I/O address
Interrupt
PS/2 Mouse
USB Host Controller
Legacy USB
Support
Parallel ATA
Serial ATA
Note that the interrupt and/or base I/O address are not
Parameter Description
Disabled Selects whether serial port A is
[Enabled] enabled or disabled.
Auto
[3F8] Selects the base I/O address for serial
2F8 port A.
3E8
2E8
IRQ 3 Selects the interrupt for a serial port A.
[IRQ 4]
Disabled Selects whether serial port B is
[Enabled] enabled or disabled (display only).
Auto
3F8 Selects the base I/O address for serial
[2F8] port A.
3E8
2E8
[IRQ 3] Selects the interrupt for a serial port A.
IRQ 4
Disabled If disabled, PS/2 mouse port will not
[Enabled] function.
Auto Detect
Disabled If disabled, the USB ports do not
[Enabled] accept the USB device class 3 (HID:
Human Interface Device).
Disabled Selects whether the USB keyboard is
[Enabled] made available in OS which does not
support USB formally.
Disabled Selects parallel ATA is enabled or
Channel 0 disabled.
Channel 1
[Both]
Disabled Selects whether the serial ATA is
[Enabled] enabled or disabled.
Configuring Your Server 4-11
Your Setting
[ ]: Factory-set