NEC N8100-1056F User Manual page 196

5-42 Installing the Operating System with Express Setup
Installing SCSI Controller Driver (N8103-65F/75)
If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:
1.
Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] →
[Computer Management].
2.
Double click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows 2000 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk
drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
[INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)
[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing SCSI Controller Driver (N8103-56/-95/N8190-126)
If you utilize SCSI controller driver (N8103-56/-95/N8190-126), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing RAID Controller Driver (N8103-80F/81F)
To additionally install the N8103-80F/81F in a system containing Windows 2000, connect the
controller and take the following steps to install the driver:
1.
When the [Found New Hardware Wizard] dialog box appears, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box appears, select [Search for a
suitable driver for my device (Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert
"Windows Server 2000 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk
drive, and click [Next].
4.
When the [Driver Files Search Results] dialog box appears, click [Next].
5.
Copying of the driver is completed, and the [Completion of the new hardware detection
wizard] dialog box below appears. Click [Complete].