NEC N8100-1056F User Manual page 197

Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically.
The following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
* For the graphics accelerator driver, the use of a remote KVM console that installs the advanced
N8115-02 remote management card is supported by the standard.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\VIDEO\SETUP.EXE
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue. If the dialog message "Direct X Ver.8 isn't installed." appears, select [continue]
to continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
USB 2.0 Driver
USB 2.0 Driver is pre-installed.
When restoring the system or re-installing the system, the driver is automatically installed in the
process of updating the system.
Installing the Operating System with Express Setup 5-43