Mother Board - NEC N8100-1056F User Manual

Mother Board

14
13-1
13-2
FRONT
1 Main power connector
2 Lithium battery
3 CMOS clear jumper switch
4 Hard disk drive access LED pin header
(Connect the LED relay cable of an additional SCSI/RAID controller.)
5 Remote management card socket
6 SCSI 2 connector (for SCSI hard disk drives)
(Exclusively used with connector of external SCSI device.)
7 SCSI 1 connector (not used in this system)
*1 SCSI hot-plug hard disk drive model only
8 Password clear jumper switch
9 Connectors for external device
10 PCI riser card slot
(For full-height boards. 133 MHz/64-bit, 3.3V, PCI-X)
11 PCI riser slot
(For only low-profile boards. 66MHz/64-bit, 3.3V, PCI-X)
12 DIMM sockets (for the interleave type)
(The sockets are called #1, #2, #3, #4, #5, #6, #7 and #8 sequentially from top.)
13 Processor sockets
13-1 Processor #1 (CPU #1)
14 Redundant fan jumper switch
15 SATA connector
1
15
2 3 4 5 6
12 11
*1
*1
13-2 Processor #2 (CPU #2)
General Description 2-9
7 8
9
REAR
10