NEC N8100-1056F User Manual page 166

5-12 Installing the Operating System with Express Setup
12.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to
mass storage driver into the floppy disk drive and follow the message to operate the
installation.
NOTE: This function requires mounting a floppy disk drive on your
server.
13.
Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive according to
the message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.
Insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Agree Software License Agreement] screen appears.
14.
Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do not
agree, click [I disagree] or press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the
appropriate value.
15.
If you selected [Yes] on [Apply Service Pack] at Basic Information, follow the procedure
below.
1) Follow the message to take Windows Server 2003 CD-ROM out of the CD-ROM
drive.
2) Follow the message to insert Windows Server 2003 Service Pack 1 or later into the
CD-ROM drive.
Windows Server 2003 and the specified application will be installed automatically and
logon to the system. Install and configure the device drivers.
16.
If you install Microsoft Windows Server 2003 R2, insert Microsoft Windows Server 2003
R2 Standard Edition DISC 2 or Microsoft Windows Server 2003 R2 Enterprise Edition
DISC 2 into the CD-ROM drive after the OS installation.
Hereinafter, proceed operations according to the message.
When the installation has finished, remove Microsoft Windows Server 2003 R2 Standard
Edition DISC 2 or Microsoft Windows Server 2003 R2 Enterprise Edition DISC 2 from
the CD-ROM drive, and restart the system.
Now the Setup using Express Setup has completed.