Mo Device; Partition Size - NEC N8100-1056F User Manual

MO Device

If you specify the file system as NTFS with MO Device connected during the installation, the file
system will not be converted normally. Disconnect MO Device and restart the installation from
the beginning.

Partition Size

The size for the partition that the system is to be installed can be calculated from the following
formula.
Size necessary to install the system + Paging File Size + Dump File Size
Size necessary to install the system = 2900MB (Only Windows Server 2003)
Paging File Size (Recommended) = Mounted Memory Size * 1.5
Dump file Size
Application Size
IMPORTANT:
The above-mentioned paging file size is recommended for
collecting debug information (memory dump). The paging file with
initial size large enough to store the dump file in the boot drive is
required.
Correct debug information might not be able to be collected due to
virtual memory shortage when the paging file is insufficient, so set
an enough size of the paging file with the entire system.
The maximum paging file size which can be set on one partition is
4095MB. If the above paging file size exceeds 4095MB, specify
4095MB for the paging file size.
The maximum dump file size for the system with more than 2GB
memory mounted is '2048MB + 12MB'.
If you install any application program or the like, add necessary
space to the partition to install these programs.
Installing Windows Server 2003 E-3
+ Application Size
3500MB (Windows Server 2003 with Service
Pack1)
4400MB (Windows Server 2003 + Service Pack1
CD-ROM)
= Mounted Memory Size + 12MB
= Required Size