Front View With Front Bezel Removed - NEC N8100-958F User Manual

Front View with Front Bezel Removed

Hot-plug SCSI hard disk drive model
See 3 - 7 on the previous page.
1 2 3
9-0
SATA fixed hard disk drive model
9-0
1 Handles (1 at the right and left each)
Hold the handles when dismounting/mounting the server from/in the rack.
2 Serial port B (COM B) connector
Connect device having a serial interface to this connector (such as remote console PC).
3 USB connectors (2 ports)
Connect device compliant with the USB interface to the connectors.
4 DUMP (NMI) switch
Press this switch to dump system memory.
5 POWER switch
Press this switch to turn on/off the power. Pressing the switch once turns on the power, and
the POWER lamp goes on. Pressing it again turns off the power. Keep pressing the switch
for 4 seconds or more forcibly turns off the power.
6 UID (Unit ID) switch
Press this switch to turn on/off the UID lamps on the front and rear panels of the server.
Pressing the switch once turns on the lamps. Pressing it again turns them off.
7 CD-ROM drive
This drive reads data from the CD-ROM.
7-1 Disk access lamp
8 3.5-inch floppy disk drive
This drive reads/writes data from/to the 3.5-inch floppy disk.
8-1 Disk access lamp
9 Hard disk bays
Mount SCSI hard disks in the bays. Each number following the bold-faced number indicates
the SCSI ID. Dummy sponge blocks are mounted in the bays except 9-1 in the standard
configuration.
10 DISK lamp (green/amber)
Hard disk lamp. Each hard disk lamp is green during access to the hard disk. The lamp
turns amber when the hard disk fails. The lamp flashes switching back and forth between
green and amber during build processing (in only disk array configuration).
11 SATA hard disk drive bays
Mount SATA hard disks in the bay. The left side bay is connected to channel 1 of the SATA
connector on the mother board. The right side bay is connected to channel 2 of the SATA
connector on the mother board.
4 5 6 7-1 7-2 7-3
10 9-1
7-2 CD tray eject button
8-2 Disk slot
General Description 2-5
8-1 8-2 8-3
9-2
9-1
7-3 Emergency hole
8-3 Eject button
1