NEC N8100-958F User Manual page 180

5-44 Installing the Operating System with Express Setup
<Common NOTES>
In addition to driver installation, ASMBE installation is mandatory for using HostRAID
functions. For the installation of ASMBE, refer to the "Adaptec Storage Manager -
Browser Edition User's Guide."
HostRAID does not permit the use of the standby/hibernation mode of ACPI functions.
Use ASMBE to maintain HostRAID, but do not use any other utilities.
Create at least one OS partition in the array you have created. If the OS partition does not
exist, the Verify may be executed for the array at the system boot.
If the following messages are included in the application log or log generated by the
ASMBE, your RAID system operates normally.
– Spare test failed for pool spare (bus=%2, ch=%3, id=%4)
– Test of all spares completed with %1 failures