5-26 Installing the Operating System with Express Setup
The Flow of Setup
This section visually describes the flow of the setup operated by Express Setup.
Insert Windows CD-ROM
Agree Software License Agreement
Insert SP CD-ROM
Express Setup
↓
Log on Automatically
After restarting the
computer, the installation
completed.
*1 The process is operated only when Disk Array Controller Board is connected and the configuration is
specified.
*2 If you select [Others], the process is completed here.
Read notes and restrictions.
Go back
Select how to install
No
Insert floppy disk into the floppy disk drive.
Select Setup Parameter File.
Terminate
New File
Select OS
Confirm the specification and input the value.
Disk Array Configuration *1
↓
Restart
↓
Creating Maintenance Partition
↓
Restart
↓
Installing Utilities
↓
Restart
↓ *2
Creating OS Partition
↓
Restart
↓
Formatting OS Partition
↓
Copying NEC Modules
↓
Copying Selected Application Modules
: Process that continues automatically
: Process that need to input or select
Confirmed
Yes
Confirmed
Existing File
Check Setup Parameter File
Correct
Incorrect
Confirm the
setting/select whether
or not to modify
Yes
OK
Retrieve
again
If you need to
reset the
specification
No
Re-select