Table of Contents
Advertisement
11
Support the middle of the cartridge
with your left hand, insert the thumb
and index finger of your right hand
into the two holes in the front of the
toner cartridge, and then insert the
cartridge so that the guides on the
cartridge fit into the rails in the
cartridge compartment in the
carousel.
12
Gently push the new toner cartridge
into the printer.
13
Close the printer's front door.
The printer must complete a 150-second calibration cycle after any
consumable has been replaced. If you open the door before the
Ready indicator on the control panel lights up and the Error indica-
tor turns off, the printer stops and repeats the calibration cycle.
52
Replacing Consumables
Advertisement
Table of Contents
