Table of Contents
Advertisement
Tray 1 (Multipurpose Tray)
1
Remove the media from Tray 1.
2
Carefully remove the jammed
media.
3
Fan the removed media to prevent
static buildup and even up the front
edges.
Do not fan transparencies
before loading them. Result-
ing static electricity may
cause printing errors.
4
Reinsert the media printing face up.
Make sure the media is lying flat and doesn't exceed the media limit mark.
Check to see if the media width guides are correct.
5
Open the right-side door, then close it.
The media jam message is no longer displayed in the Status Display
message window.
74
Clearing Media Jams
Advertisement
Table of Contents
