Table of Contents
Advertisement
Printer Information—Displays the total print count, the list of installed
options and the memory size.
Supplies status—Displays consumables usage (percentage remaining)
for the toner cartridges and OPC drum cartridge.
Refer to the Status Display's online help for information on all of its functions.
Working with the Printer Menu
Power On Test—Performs an AIDC (Auto Image Density Control)
calibration cycle. Wait until the test is finished, the Ready indicator on the
control panel lights up, and the Error indicator goes off (less than 150
seconds).
Maintenance...
Duplex Density
Adjusts the density of the second side of the paper when duplex
printing.
Energy Saver
Sets the length of time until the printer enters Energy Saver mode
after it no longer receives print jobs or is not operated. If a print job is
received while the printer is in Energy Saver mode, the printer warms
up, then returns to normal print mode before starting to print.
Auto Continue
When set to On, causes the printer to continue printing even if the
specified tray is not loaded with paper of the correct size. If the Auto
Continue setting is changed during printing, the setting remains valid
for future print jobs.
Toner Replace...—Allows you to replace a toner cartridge.
1. From the list, select the color of the toner cartridge to be replaced.
2. Select the capacity of the toner cartridge (1500 or 4500).
3. Click OK.
4. Open the front door, and then replace the toner cartridge.
Refer to "Replacing a Toner Cartridge" on page 49 for complete details.
Print Status Sheet
Prints an LED status Sheet, which lists all LED combinations and their
related printer status and error conditions.
42
Using the Status Display
Advertisement
Table of Contents
