Basic Operations; Loading/Removing Disc - American Audio Encore 2000 User Manual And Reference Manual

BASIC OPERATIONS

1. LOADING/EJECTING DISCS & OR USB DEVICE
The Encore 2000 can only play 3 inch and regular 5 inch CDs. When loading a CD into the player
always hold the disc by it edge). Load the disc label side up and never touch the signal surface (the
glossy side). To remove a disc from the player press the OPEN/CLOSE BUTTON (1).
CAUTION:
• NEVER attempt to load any other objects besides 3" and 5" CDs.
• NEVER attempt to load more than one disc at a time. Doing so may result in severe damage to
your unit.
• DO NOT force the transport tray open or close when the power is off, this may damage the drive
system.
When loading a USB stick, USB card reader, or external hard drive make sure you are correctly lined
up with the USB port and connect to the USB port. To disconnect a USB drive, stop playback and
disconnect the USB connection. VERY IMPORTANT USB INFORMATION:
• The ENCORE 2000 will only read MP3 files or WAV files.
• If you are using a SD Card via USB SD Card reader, you must remove the USB SD Card
reader first to change SD Card's. Please do not remove the SD Card from the USB SD Card
reader while the USB card reader is still connected to the unit.
NOTE: For higher quality MP3 files (more than 128 kbps) American Audio recommends "High
Speed" SD Cards. Using high speed cards will ensure the best performance with your American
Audio Player.
• Only supports FAT/FAT32 formatted devices.
NOTE: If the ENCORE 2000 cannot read your USB device, please make sure that it FAT format-
ted.
CAUTION:
• NEVER remove a USB device while in PLAY mode.
Figure 8: Press the Eject button to load and remove a disc. Remeber: When loading a disc always hold the disc by it
edges and load the disc label side up.
American Audio - www.AmericanAudio.us - Encore 2000 Instruction Manual Page 18
© ®
Figure 8