Martin MAC III AirFX User Manual page 50

Menu level 1 Menu level 2
FOCUS
TRACKING
FOLLOWSPOT
MODE
AUTOMATIC
PERSONALITY
LAMP ON
(continued)
DMX LAMP OFF
DMX RESET
PARAMETER
SHORTCUTS
SHUTTER
BLACKOUT
DISPLAY
DISPLAY
INTENSITY
DISPLAY
ROTATION
50
Menu level 3 Menu level 4
Off
Near
Medium
Far
FOLLOWSPOT
Off / On
MODE
LOCK/UNLOCK
PAN & TILT
LOCK PAN
Off / On
LOCK TILT
Off / On
Off
On
DMX
Off
On
Off
On
Off
On
On
Off
On
2 min.
5 min.
10 min.
Auto
1 - 100%
0° / 90° / 180° / 270° / Auto
Table 3: Control menus
MAC III AirFX user manual
Notes (Default settings in bold print)
Disables zoom focus linking
Enables zoom focus linking, optimized for
short-throw projection (5 - 10 m)
Enables zoom focus linking, optimized
for medium-throw projection (10 - 20 m)
Enables zoom focus linking, optimized for
long-throw projection (20+ m)
Enables/disables followspot mode. In
followspot mode, DMX control of pan and
tilt is disabled so that the head can be
moved using a followspot handle.
Engages or disengages both the pan and
tilt motors acting as a brake on head
movement. DMX control over pan is still
disabled and this command is only
available when followspot mode is on.
Engages (ON) the pan motor to act as a
brake on head movement, or disengages
(OFF) it so that the head can be freely
panned using a followspot handle. DMX
control over pan is still disabled and this
command is only available when
followspot mode is on.
Engages (ON) the tilt motor to act as a
brake on head movement, or disengages
(OFF) it so that the head can be freely
tilted using a followspot handle. DMX
control over tilt is still disabled and this
command is only available when
followspot mode is on.
Automatic lamp striking disabled
Lamp strikes automatically within 90
seconds of fixture being powered on
Lamp strikes automatically when the
fixture receives a DMX signal
Lamp cannot be powered off via DMX (can
be overridden: see DMX protocol)
Lamp can be powered off via DMX
Fixture cannot be reset via DMX (can be
overridden: see DMX protocol)
Fixture can be reset via DMX
Effects avoid open positions during effects
changes
Effects take shortest route during
changes, crossing open positions if
necessary.
Shutter closes after 5 seconds when
intensity is dimmed to 0%
Shutter operation is independent of
intensity
Display permanently on
Display goes into sleep mode 2 minutes
after last key press
Display goes into sleep mode 5 minutes
after last key press
Display goes into sleep mode 10 minutes
after last key press
Display auto-adjusts to ambient light level
Manually set display intensity
Rotate display manually or set to
auto-rotate to match fixture orientation