Martin MAC III AirFX User Manual page 2

Dimensions
All measurements are expressed in millimeters
The minimum center-to-center
distance can be reduced if pan and
limits are set via the control menus
© 2012-2013 Martin Professional A/S. Information subject to change without notice. Martin Professional A/S and all affiliated compa-
nies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by
the use of, inability to use or reliance on the information contained in this manual. The Martin logo, the Martin name and all other
trademarks in this document pertaining to services or products by Martin Professional A/S or its affiliates and subsidiaries are trade-
marks owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.
P/N 35000265, Rev. D