Manual Mode; Timed Automatic Start - Braemar Down Series Owners Manual Installation, Operating & Service Instructions

WALL CONTROL FUNCTIONS

Manual Mode

To switch to Manual mode, press AUTO until
"Man" appears in the display. In Manual mode
the cooling level can be manually adjusted. In
Manual mode, press COOL to choose between
circulating cool air or fresh air. When "Cool" is
displayed, fresh cool air will circulate into the
building. When "Vent" is displayed as shown
(fig 28), fresh air will circulate through the
building.
Press to increase the fan speed and circulate
more air. Press
and circulated less air. Press once to change the
speed by one increment. Hold the button down
to change the speed more.

Timed Automatic Start

You can set the cooler to turn on after a set
number of hours.
1. To set the delayed start time, press TIMER
with the cooler turned OFF. "Starting in" will be
displayed as shown (fig 29) with the last mode of
operation (Automatic or Manual).
2. If you want the cooler to turn on in Automatic
mode with the previous settings, then press
AUTO until "Auto" is displayed. Alternatively, if
you want the cooler to turn on in Manual mode,
press AUTO until "Man" is displayed and then
press cool and then
fan speed.
3. To set the time until the start, press TIMER.
4. Then press
cooler can start up to 24 hours in advance.
5. Press TIMER again to initiate the timed
automatic start. The timed start will not repeat.
to decrease the fan speed
or to set the required
or to adjust the time. The
27
MANUAL MODE DISPLAY
ILL1097-A
28
ILL1098-A
29
18
ILL1136-A