Alarm Definitions; Major Alarms - Paradyne HOTWIRE 7900 User Manual

MTU-M Alarms

Alarm Definitions

Major Alarms

8-6
4. Select the number of alarms to display and press Enter. The following is an
example of the alarm display format:
Menu path: Main Alarms
(all, 0-255)
I HTU C/R 3 HSTATUS TASK
Polling state change detected for HTU 3
polling state HTU 3
I HTU C/R 5 HSTATUS TASK
status received from new card
I HTU C/R 6 HSTATUS TASK
status received from new card
I HTU C/R 8 HSTATUS TASK
Polling state change detected for HTU 3
polling state HTU 3
I HTU C/R 5 HSTATUS TASK
status received from new card
Hit 'q' to quit or return to continue ...
The following section defines major and abnormal alarms. Minor alarms are not
currently used.
Major alarms occur when:
The xTU-C polling state changes from in service (INS) to out of service
(OOS).
The CP or CO carrier changes from up to down (not an alarm condition for
V.35).
The status of Loop A or Loop B changes from up to down at the CO or CP.
March 1998
Display alarm level
Wed June 30
Wed June 30
Wed June 30
Wed June 30
Wed June 30
(xtu id, system, all)
00:00:13 1997
00:00:19 1997
00:00:48 1997
00:00:53 1997
00:00:56 1997
7900-A2-GB20-00