System Terminal Interface; Connecting A System Terminal - Paradyne HOTWIRE 7900 User Manual

System Terminal Interface

Connecting a System Terminal

7900-A2-GB20-00
You can connect a system terminal directly or through a modem to the MTU-M
front panel. The system terminal must be a VT100-compatible terminal or a PC
running emulation software.
The system terminal provides a menu-driven interface to the MTU-M card that
allows you to:
Monitor the status of HDSL and SDSL nest card termination units (xTUs)
configured as central site/office (CO) ( xTU-Cs)
Monitor the status of associated customer premises (CP) termination units
(xTU-R)
Perform loopback testing on xTU-C/R pairs
Change MTU-M operational and network parameters
Reset the unit
NOTE:
The MTU-M monitors only those nest card termination units configured as
central office/site (CO) (xTU-C). The status of an xTU-C's associated CP
configured unit (xTU-R) is monitored through the xTU-C.
March 1998
4
4-1