Accessing Mtu-M Alarm Functions - Paradyne HOTWIRE 7900 User Manual

MTU-M Alarms

Accessing MTU-M Alarm Functions

8-2
To access the MTU-M Alarms menu from the MTU-M Main Menu, type a at the
MTU-M –> prompt and press Enter. The Alarms menu appears as follows:
Menu path: Main Alarms
MTU-M Alarms Menu
Select Command:
COMMAND DESCRIPTION
Alarm on – Display MTU-M alarms
– (Case sensitive, or use 'ALARM ON')
Alarm off – Turn off display of MTU-M alarms
– (Case sensitive, or use 'ALARM OFF')
Clear – Reset Alarm Display Pointer
Display – Display MTU-M alarms
Redisplay – Redisplay MTU-M alarms
Quit – Quit Command
Alarms ->
Command Function
Alarm on Allows alarms to display at the system terminal.
Alarm off Prevents alarms from displaying at the system terminal.
Clear Clears the current MTU-M alarm buffer.
Display Allows you to group and view alarms by category, view individual alarms,
or view all alarms. Refer to the screen samples following this table for
further detail on the display alarm function.
Redisplay Allows you to redisplay the last alarms viewed.
Quit Takes you back to the MTU-M Main Menu.
March 1998 7900-A2-GB20-00