Table of Contents
Advertisement
MTU-M Maintenance Functions
Changing MTU-M Operational Parameters (sysconfig)
MTU–M Operations Parameters
EEPROM values are:
Polling Range:
Polling interval:
Poll time-out on 256th's second
Initial alarm on/off setting:
Initial menu on/off setting:
Console port baud rate:
Hit return to continue
Would you like to modify values? [Y/N]:: Y
You must enter password to modify values: ***
The following values have been copied to a work buffer and
individual changes will be made to the variables in the work buffer.
When finished with changes, enter <quit>
and you will be asked if you want the changes saved.
Hit return to continue
6-4
The sysconfig option on the Maintenance menu is used to display and change
several parameters that affect MTU-M operation. Type sys at the maint –>
prompt, to display the Operating Parameters screen (values displayed depend on
your current configuration):
NOTE:
If in the course of making changes you want to start over with the current
settings, use the read option. This resets the operations parameters back to
their current values.
Changes to MTU-M operational parameters do not take effect until you Quit the
MTU-M Operations Parameters menu and save your changes.
Menu path: Main
Maintenance
March 1998
sysconfig
...
...
VALID
2 – 16
10 seconds
30
ON
ON
9600 baud
7900-A2-GB20-00
Advertisement
Table of Contents
