MTU-M Installation Procedures
Package Checklist
Installing the MTU-M
496-15104
7900-A2-GB20-00
Verify that your package contains the following:
A Hotwire Model 7900 MTU-M
System terminal cable (9 pin-to-9 pin)
Warranty card
The procedures in this guide assume that you have already installed the Hotwire
Model 7900 Nest. Installation of the Hotwire Model 7900 Nest and nest card
termination units is described in separate user's guides. Refer to
Documents
in About this Guide .
!
HANDLING PRECAUTIONS FOR
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.
March 1998
2
Product-Related
2-1