Accessing Performance Functions - Paradyne HOTWIRE 7900 User Manual

Accessing Performance Functions

Select Command:
Select time period->
7900-A2-GB20-00
MTU-M performance functions allow you to view current and past performance
information for an individual xTU-C. Performance functions can only be accessed
from a system terminal.
NOTE:
Performance statistics are files of data accumulated and stored by the
MTU-M for each nest card termination unit. Swapping or removing nest card
termination units does not clear the data stored in these files within the
MTU-M. It is recommended that you clear performance statistics as soon as
possible after replacing or removing an xTU-C to avoid displaying incorrect
data.
Procedure
To access the MTU-M Performance functions:
1. Type p at the MTU-M –> prompt and press Enter.
A menu displays allowing you to select an xTU-C.
2. Enter an xTU-C ID and press Enter.
The following menu displays:
Menu path: Main Performance
Select Time Period Menu
COMMAND
A – Prev 1 min – Select previous 1 minute time period
B – Curr 15 min – Select current 15 minute time period
C – Prev 15 min – Select previous 15 minute time period
D – Curr 1 hr – Select current 1 hour time period
E – Prev 1 hr – Select previous 1 hour time period
F – Curr 12 hr – Select current 12 hour time period
G – Prev 12 hr – Select previous 12 hour time period
I – Curr 24 hr – Select current 24 hour time period
J – Prev 24 hr – Select previous 24 hour time period
K – Curr 7 day – Select current 7 day time period
L – Prev 7 day – Select previous 7 day time period
M – Clear – Clear Performance Stats for All Time Periods
Quit – Quit Command
March 1998
MTU-M Status and Performance Functions
xDSL circuit # (2-80)
DESCRIPTION
5-7