Table of Contents
Advertisement
maint–>net
MTU–M Network Parameters
COMMAND
-Mac Address
1 -My IP Address
2 -Subnet Mask
3 -SNMP Manager Address
4 -Default Gateway
5 -Broadcast Address
6 -System Contact
7 -System Name
8 -System Location
9-Change Password
Hit return to continue
Silencing External Alarms (ACO)
7900-A2-GB20-00
Menu path: Main
Maintenance
The Alarm Cut Off (ACO) option on the Maintenance menu is used to shut off an
external alarm condition. The MTU-M front panel ACO LED lights to indicate ACO
is on. The MTU-M front panel also contains an ACO push-buton.
Procedure
To turn on ACO:
1. Type a at the maint –> prompt and press Enter.
or
2. Press the recessed ACO push button on the MTU-M front panel.
3. The ACO LED on the MTU-M front panel lights and the following message
appears:
I MTU-M
turn on ACO
The ACO LED is turned off when the alarm condition that caused the external
alarm has cleared.
March 1998
Netconfig
- set ip address
- set subnet mask
- set snmp manager address
- set default gateway address
- set broadcast address
- set broadcast address
- set name of contact
- set node's fully qualified domain
- set the physical location of mtu
- Change the administrator password
...
MONITOR TASK
MTU-M Maintenance Functions
(Screen 3 of 3)
Wed Mar 18 00:19:56 1998
6-9
Advertisement
Table of Contents
