Unpacking; Piece Inventory - Grizzly G1067Z Instruction Manual

Unpacking

The Model G1067Z Wood Lathe is shipped from
the manufacturer in a carefully packed carton. If
you discover the machine is damaged after
you've signed for delivery, please call Customer
Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The G1067Z represents
a load of 179 pounds.
Seek assistance before
beginning assembly.
Some metal parts may
have sharp edges on
them
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
-6-
after they are

Piece Inventory

After all the parts have been removed from the
carton, you should have:
• Main Lathe Unit
• Grizzly Paddle Switch
• Front/Rear Covers
• Index Pin
• 6'' Face Plate
• 12'' Tool Rest
• Tool Rest Support
• Tool Rest Extension
• Knock Out Bar
• Stand Legs (4)
• Stand Support, Long (2)
• Stand Support, Short (2)
• Upper Mount Plate (2)
• End Stand Support (2)
Fasteners:
5
• Carriage Bolt
5
• Flat Washer ⁄
16
5
• Cap Screw ⁄
16
5
• Hex Nut ⁄ "- 18
16
• Phillips Head Screw 10 - 24 x
5
• Lock Washer
In the event that any non proprietary parts are
missing (e.g. a nut or a washer...), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
3
⁄ "- 18 x ⁄ "
16 4
"
"- 18 x 1"
3
⁄ "
8
⁄ "
16
G1067Z Wood Lathe
24
24
8
32
12
8