Site Considerations; Clean Up - Grizzly G1067Z Instruction Manual

Site Considerations

Floor Load
The Model G1067Z weighs 179 lbs. Most com-
mercial floors are suitable for your machine.
Some floors may require additional reinforcement
to support the machine, the operator, and the
workpiece.
Working Clearances
Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your machine.
Unsupervised
and visitors inside your
shop could receive seri-
ous
Ensure child and visitor
safety
entrances to the shop
locked at all times. DO
NOT allow unsupervised
children or visitors in the
shop at any time.
G1067Z Wood Lathe
children
personal injury.
by keeping all

Clean Up

The unpainted surfaces are coated with a waxy
oil to protect them from corrosion during ship-
ment. Remove this protective coating with a sol-
vent cleaner or citrus-based degreaser such as
Grizzly's G7895 Degreaser. To clean thoroughly,
some parts may need to be removed. For opti-
mum performance from your machine, make
sure you clean all moving parts or sliding
contact surfaces that are coated. Avoid chlo-
rine-based solvents as they may damage painted
surfaces should they come in contact.
Gasoline and petroleum
products have low flash
points and could explode
if used to clean machin-
ery. DO NOT use gaso-
line or petroleum prod-
ucts to clean the machin-
ery.
Smoking near solvents
could ignite an explosion
or fire and cause serious
injury. DO NOT smoke
while using solvents.
Lack of ventilation while
using solvents could
cause serious personal
health risks, fire, or
environmental hazards.
Always work in a well
ventilated area to pre-
vent the accumulation
of dangerous fumes.
Supply the work area
with a constant source
of fresh air.
-7-