Section 1: Introduction; Commentary - Grizzly G1067Z Instruction Manual

SECTION 1: INTRODUCTION

Commentary

We are proud to offer the Model G1067Z. This
machine is part of a growing Grizzly family of fine
woodworking machinery. When used according
to the guidelines set forth in this manual, you can
expect years of trouble-free, enjoyable operation
and proof of Grizzly's commitment to customer
satisfaction.
We are pleased to provide this manual with the
Model G1067Z. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C
/ Technical Documentation
O
P.O. Box 2069
Bellingham, WA 98227-2069
G1067Z Wood Lathe
Lack of familiarity with
this manual could
cause serious person-
al injury. Become
familiar with the con-
tents of this manual,
including all the safety
warnings.
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1067Z as supplied when the manual was pre-
pared. However, owing to Grizzly's policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
For your convenience, we always keep current
Grizzly manuals available on our website at
www.grizzly.com. Any updates to your machine
will be reflected in these manuals as soon as they
are complete. Visit our site often to check for the
latest updates to this manual!
-5-