Icon
Administrative messages
Your administrator can send important messages directly to your telephone, for example,
notification of an early office closing due to inclement weather or information about an imminent
service interruption.
These types of messages can take any of the following forms:
• a text message streaming across the top display line, accompanied by an audible alert,
• an audio message broadcasting through the Speaker (or the headset if that device is
active),
• an "interrupt" screen notifying you that you are receiving an audio alert, with instructions
for canceling the message or resuming your previous activity, such as continuing a call.
While receiving an audio message, you can switch between the Speaker, handset, and headset
as desired, can terminate the pushed audio content by "going on-hook," and can adjust the
volume, as you normally would during a call.
Telephone stand
The telephone stand attaches to the phone in one of two ways so that you can place the phone
in a relatively flat position or at an angle. If your phone is in the upright position for wall
™
Avaya one-X
Deskphone H.323 9608/9611G User Guide
Description
Team icon indicating this team member is not on a call
but is forwarding incoming calls.
Team icon indicating this team member is busy on a call
and is forwarding incoming calls.
Your administrator may place this icon on one of your
softkeys as an energy-saving measure. Pressing this
softkey turns the display backlight off. When the
backlight is off, any activity on your telephone turns it
back on.
Indicates that your phone is in an "Unnamed
Registration" state, caused by not entering an extension
within 60 seconds of being prompted for one or not
entering a password. In this situation, your phone may
register with its call server but will show only one call
appearance, no features, and will allow only outgoing
calls. To switch from the unnamed registration state,
login with a valid extension and password.
Administrative messages
August 2010
11
Need help?
Do you have a question about the 9608 and is the answer not in the manual?