Table of Contents
Advertisement
Chapter 2
The VIA P4XB-MA mainboard supports the Intel
478 pin package. When installing the CPU, make sure the CPU has a heat sink
and a cooling fan attached on the top to prevent overheating. If the heat sink
and cooling fan are not included with the CPU, contact your dealer to purchase
and install them before turning on the computer.
CPU Installation Procedures
1. Pull the lever sideways away
from the socket. Then raise the
lever up to a 90-degree
angle.
2. Look for the dot/cut edge. The
dot/cut edge should point to-
wards the lever pivot. The
CPU will only fit in the correct
orientation.
3. Hold the CPU down firmly,
and then close the lever shut
to complete the installation.
Overheating will seriously damage the CPU and system.
Always make sure the cooling fan can work properly to
protect the CPU from overheating.
WARNING!
Central Processing Unit: CPU
®
Pentium
2-2
®
4 processor in the
Advertisement
Table of Contents
