Table of Contents
Advertisement
Chapter 3
Typematic Rate Setting
This item is used to enable or disable the typematic rate setting including
Typematic Rate & Typematic Delay.
Typematic Rate (Chars/Sec)
After Typematic Rate Setting is enabled, this item allows you to set the rate
(characters/second) at which the keys are accelerated. Settings: 6, 8, 10, 12,
15, 20, 24 and 30.
Typematic Delay (Msec)
This item allows you to select the delay between when the key was first pressed
and when the acceleration begins. Settings: 250, 500, 750 and 1000.
Security Option
This specifies the type of BIOS password protection that is implemented. Set-
tings are described below:
Option
Setup
System
OS Select For DRAM > 64MB
This allows you to run the OS/2
64MB. Setting options: Non-OS2, OS2.
Video BIOS Cacheable
Selecting Enabled allows caching of the video BIOS ROM at C0000h to C7FFFh,
resulting in better video performance. However, if any program writes to this
memory area, a system error may result. Settings: Enabled and Disabled.
Description
The password prompt appears only when end users try to
run Setup.
A password prompt appears every time when the com-
puter is powered on or when end users try to run Setup.
®
operating system with DRAM greater than
3-10
Advertisement
Table of Contents
