Table of Contents
Advertisement
Chapter 3
Delay 4 Sec.
Power/Sleep LED
This setting determines how Power LED on the case indicates the sleep state.
Settings are:
Single LED The Power LED blinks to indicate the sleep state.
Dual LED
IRQ/Event Activity Detect
Press <Enter> to enter the sub-menu and the following screen appears:
PS2KB Wakeup Select, PS2KB Wakeup from S3, PS2MS Wakeup from
S3, USB Resume from S3, VGA, LPT & COM, HDD & FDD, PCI Mas-
ter, Wake Up On LID, PowerOn by PCI Card, Modem Ring Resume
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the system
on a scheduled time/date.
When you press the power button, the computer en-
ters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer is
turned off.
The Power LED changes its color to indicate the sleep
state.
3-24
Advertisement
Table of Contents
