Hawking HI-GAIN HAW2R1 User Manual page 86

Enable Wireless
Access Control (4):
MAC Address (5):
Comment (6):
Add (7):
Clear (8):
After you finish with all of your settings, click "Apply" and the following message will
be displayed on your web browser:
To enforce MAC address filtering,
you have to check 'Enable Wireless Access Control'. When this
item is unchecked, wireless Smart Repeater Pro will not enforce
MAC address filtering of wireless clients.
Input the MAC address of your wireless devices here, dash ( - )
or colon ( : ) are not required. (i.e. If the MAC address label of
your wireless device indicates 'aa-bb-cc-dd-ee-ff' or
'aa:bb:cc:dd:ee:ff', just input 'aabbccddeeff'.
You can input any text here as the comment of this
MAC address, like 'ROOM 2A Computer' or
anything. You can input up to 16 alphanumerical
characters here. This is optional and you can leave
it blank, however, it's recommended to use this field
to write a comment for every MAC addresses as a
memory aid.
Click 'Add' button to add the MAC address and associated
comment to the MAC address filtering table.
Click 'Clear' to remove the value you inputted in MAC address
and comment field.
80