Hawking HI-GAIN HAW2R1 User Manual page 116

Enable IP
Filtering Table (11):
IP Filtering
Table (12):
Add PC (13):
Delete
Selected (14):
Delete All (15):
After you finish with all of your settings, click "Apply" and the following message will
be displayed on your web browser:
Press "Go Back" to save the settings and go back to the web management interface; press
addresses.
Check this box to enable IP address based
filtering, and please select "Deny" or "Allow"
to decide the behavior of IP filtering table. If you select deny, all
IP addresses listed in filtering table will be denied from
connecting to the network; if you select allow, only IP addresses
listed in filtering table will be able to connect to the network,
and rejecting all other network devices.
All existing IP addresses in filtering table will be
listed here.
Click this button to add a new IP address to IP filtering table, up
to 20 IP addresses can be added.
Please refer to section 4-3-1-1 "Add PC" below.
If you want to delete a specific IP address entry,
check the "select" box of the IP address you want to delete, then
click "Delete Selected" button. (You can select more than one IP
addresses).
If you want to delete all IP addresses listed here, please click
"Delete All" button.
110