Hawking HI-GAIN HAW2R1 User Manual page 129

Public IP
address (2):
Client PC IP
address (3):
Computer Name (4):
Add (5):
Reset (6):
Current
DMZ table (7):
Delete
Selected (8):
Delete All (9):
Reset (10):
After you finish with all of your settings, click "Apply" and the following message will
You can select 'Dynamic IP' or 'Static IP' here.
If you select 'Dynamic IP', you have to select an Internet
connection session from dropdown menu; if you select 'Static
IP', please input the IP address that you want to map to a
specific private IP address.
Please input the private IP address that the
Internet IP address will be mapped to.
Pull down the menu and all the computers connected to the
Smart Repeater Pro will be listed here. You can easily to select
the computer name without checking the IP address of the
computer.
Click 'Add' button to add the public IP address and associated
private IP address to the DMZ table.
Click 'Clear' to remove the value you inputted in Public IP
address and Client PC IP address field.
All existing public IP address and private IP
address mapping will be displayed here.
If you want to delete a specific DMZ entry, check
the 'select' box of the DMZ entry you want to delete, then click
'Delete Selected' button. (You can select more than one DMZ
entries).
If you want to delete all DMZ entries listed here, please click
'Delete All' button.
You can also click 'Reset' button to unselect all DMZ entries.
123