Hawking HI-GAIN HAW2R1 User Manual page 106

UDP Port to Open (5): This is the out going (Outbound) range of UDP port numbers
Comment (6):
Pop. Applications
Add (8):
Reset (9):
Current Trigger-Port
(10):
Delete
Selected (11):
Delete All (12):
Note: Only one LAN client can use a particular special application at a time.
this particular application.
for this particular application.
The description of this setting.
This section lists the more popular applications that (7):
require multiple connections. Select an application
from the Popular Applications selection and click 'Add' to save
the setting to "Current Trigger-Port Table".
Add the setting to the "Current Trigger-Port Table".
Click "Reset" will clear all above setting and you can set up
again.
All the settings for the special applications will be
listed here. If you want to remove some Special Application
settings from the "Current Trigger-Port Table", select the
Special Application settings you want to remove in the table and
then click "Delete Selected". If you want remove all Special
Appliacation settings from the table, just click "Delete All"
button. Click "Reset" will clear your current selections.
Please select a special application by clicking
the 'Select' box of the mapping, then click 'Delete Selected'
button to remove the setting. If there's no setting here, this
button will be grayed out.
Delete all settings existed in trigger port table.
100