Hawking HI-GAIN HAW2R1 User Manual page 53

Idle Time Out (6):
After you finish with all the settings, click the "Apply" button. The following message
will be displayed on your web browser:
Press "Go Back" to save the settings and go back to the web management interface; press
"Apply" to save the settings made and restart the Smart Repeater Pro. The settings will
take effect after it reboots.
connection is interrupted, the Smart Repeater Pro will
re-connect automatically.
Connect On-Demand – Only connect when you want to surf the
Internet. "Idle Time Out" is set to stop the connection when the
network traffic is not sending or receiving after an idle time.
Manual – After you have selected this option, you will see the
"Connect" button and "Disconnect" button, click "'Connect"
and the Smart Repeater Pro will connect to the ISP. If you want
to stop the connection, please click "Disconnect" button.
If you have selected the connection type to
"Connect-On-Demand", please input the idle time out.
47