Hawking HI-GAIN HAW2R1 User Manual page 100

Type (4):
Port Range (5):
Comment (6):
Add (7):
Reset (8):
Port Forwarding
Table (9):
Delete
Selected (10):
Delete All (11):
Reset (12):
After you finish with all of your settings, click "Apply" and the following message will
be displayed on your web browser:
computer.
Select the type of connection, TCP or UDP. If you're not sure,
please select 'Both'.
Input the starting port number in the left field, and input the
ending port number in the right field. If you only want to
redirect a single port number, just fill the port number in the left
field.
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add the mapping to port forwarding table.
Remove all inputted values.
All existing port forwarding mappings will
be displayed here.
Please select a port forwarding mapping by
clicking the "Select" box of the mapping, then click "Delete
Selected" button to remove the mapping. If there's no existing
mapping, this button will be grayed out.
Delete all mappings existed in virtual server table.
Unselect all mappings.
94