Hawking HI-GAIN HAW2R1 User Manual page 103

Computer Name (3):
Private Port (4):
Type (5):
Public Port (6):
Comment (7):
Add (8):
Reset (9):
Virtual Server
Table (10):
Delete
Selected (11):
Delete All (12):
Reset (13):
After you finish with all of your settings, click "Apply" and the following message will
be displayed on your web browser:
Pull down the menu and all the computers connected to the
Smart Repeater Pro will be listed here. You can easily to select
the computer name without checking the IP address of the
computer.
Input the port number of the IP address
which provides Internet service.
Select the type of connection, TCP or UDP. If you're not sure,
please select 'Both'.
Please select the port number of Internet IP address which will
be redirected to the port number of local IP address defined
above.
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add the mapping to virtual server table.
Remove all inputted values.
All existing virtual server mappings will be
displayed here.
Please select a virtual server mapping by clicking
the "Select" box of the mapping, then click "Delete Selected"
button to remove the mapping. If there's no existing mapping,
this button will be grayed out.
Delete all mappings existed in virtual server table.
Unselect all mappings.
97