Hawking HI-GAIN HAW2R1 User Manual page 31

b. Click "Scan" to locate all the networks within your area. Once you have found
the network you wish to repeat, highlight it and click "Connect". Each wireless
network will be listed with their respective signal strengths and whether or not
they are using security. For secure networks, you will need to have the correct
key to access the network. If you do not you will not be able to repeat this
network. It is recommended that the signal strength of the network you are
trying to repeat is above 50% to ensure a solid connection to the Internet.
Without a stable Internet connection, the rebroadcasted signal will be unstable as
well. If you wish to setup a Pass Through mode (Network Bridging Mode), see
section 2-3-1
c. The "Quick Setup" wizard will now attempt to connect to your wireless Internet
connection.
Select "Automatic Setup" to have the wizard automatically configure the IP
25