Hawking HI-GAIN HAW2R1 User Manual page 71

2.4 GHz (B)
2.4 GHz (N)
2.4 GHz (B+G)
2.4 GHz (G)
2.4 GHz (B+G+N)
NOTE: For 802.11b and 802.11g mode, the signals can be transmitted
only by antenna 1 (The antenna on the right side of the rear panel).
For 802.11n mode: The Smart Repeater Pro is operating in a 2T3R
Spatial Multiplexing MIMO configuration. 2 antennas are for signal
transmitting and 3 antennas are for signal receiving.
ESSID (2):
Channel Number (3):
2.4GHz band, only allows 802.11b wireless network clients to
connect to this Smart Repeater Pro (maximum transfer rate
11Mbps).
2.4GHz band, only allows 802.11n wireless network clients to
connect to this Smart Repeater Pro (maximum transfer rate
300Mbps).
2.4GHz band, only allows 802.11b and 802.11g wireless
network clients to connect to this Smart Repeater Pro
(maximum transfer rate 11Mbps for 802.11b clients, and
maximum 54Mbps for 802.11g clients).
2.4GHz band, only allows 802.11g wireless network clients to
connect to this Smart Repeater Pro (maximum transfer rate
54Mbps).
2.4GHz band, allows 802.11b, 802.11g, and 802.11n wireless
network clients to connect to this Smart Repeater Pro
(maximum transfer rate 11Mbps for 802.11b clients, maximum
54Mbps for 802.11g clients, and maximum 300Mbps for
802.11n clients).
This is the name of wireless Smart Repeater Pro. You can type
any alphanumerical characters here, maximum 32 characters.
ESSID is used to identify your own wireless Smart Repeater Pro
from others when in the same area. Default SSID is
"Smart_Repeater_Pro". It's recommended to change default
ESSID value to the one which is meaningful to you, like myhome,
office_room1, etc.
Please select a channel from the dropdown list of 'Channel
65