General Setup; General Setup Operation; Displaying The Time; Demonstration Function - Alpine INA-W910R Owner's Manual

General Setup

General Setup Operation

The Parking Brake must be engaged to access the General mode
screen. Attempting to access this screen while driving will display
the warning-Can't operate while driving.
The following steps 1 to 5 are common operations to each
"Setting item" of General Setup. Refer to each section for
details.
1
Press SOURCE/ on the unit.
The Source Select screen is displayed.
2
Touch [ ] on the main source screen.
The Setup Select screen is displayed.
3
Touch [ ] of General Setup.
The General Setup screen appears.
4
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
Clock / Demonstration / Beep / Auto Scroll / Language Sel. /
Key Dimmer Level / Security Code
5
Touch [ ] to return to the previous screen.
Touch [ Exit ] to return to the main source screen that was
displayed before the setup operation was started.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.

Displaying the Time

The clock indication on the monitor display is turned on or off
respectively.
Setting item: Clock
Setting contents: OFF / ON
• The clock of the unit will be automatically updated according to the
data that the Navigation System provides, and cannot be adjusted
manually.
• If the GPS antenna is not connected correctly, the clock indication on
the unit may be wrong because the time information cannot be
received. In this case, it is suggested to set "Clock" to "OFF".

Demonstration Function

This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
Setting item: Demonstration
Setting contents: OFF / ON
ON: Turns on the demonstration mode to show the basic
operations.
OFF: Turns off the demonstration mode.
• The demonstration operation is automatically repeated until the
function is turned off.
46
-EN

Sound (Beep) Guide Function

Setting item: Beep
Setting contents: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button is pressed/
touched.
• This setting is unavailable for the navigation mode.

Setting the Scroll

Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: Auto Scroll
Setting contents: OFF / ON
OFF: Turns off the Auto scroll mode. Scroll display is done
once as a track is changed.
ON: Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
• The display scrolls on the unit when the screen is filled up.
• Song, artist and album name, etc. scrolls when an iPod/iPhone is
connected.

Changing the Language Font

Four types of font can be selected.
Setting item: Language Sel.
Setting contents: Mode1 / Mode2 / Mode3 / Mode4
Mode1: Normal Font Display (ISO8859-1).
Mode2: Russian Font Display (WINDOWS-1251)
You cannot use this font for display in RDS, Tuner
mode.
Mode3: European Font Display (WINDOWS-1252)
Mode4: Hebrew Font Display
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Dimmer Level
Setting level: -2 to +2