Storing Settings In The Memory; Calling Up The Preset Memory; Search Function - Alpine INA-W910R Owner's Manual

Adjusting the Frequency
Touch [ ] or [ ] of Freq. to adjust the frequency of the selected
band.
Adjustable frequency bands: 63 Hz to 17.5 kHz (in 1/3 octave steps)
Band-1: 63 Hz~200 Hz (63 Hz)
Band-2: 160 Hz~1 kHz (160 Hz)
Band-3: 630 Hz~4 kHz (630 Hz)
Band-4: 1.6 kHz~10 kHz (1.6 kHz)
Band-5: 10 kHz~17.5 kHz (10 kHz)
Adjusting the Level
Touch [ ] or [ ] of Level to adjust the level of selected band.
Adjustable level: –6 to +6 dB
Setting the Bandwidth
Touch [ ] or [ ] of Q to select the bandwidth.
Adjustable bandwidth: 1, 2, 3, 4
3
To adjust another band, repeat step 2 and adjust all
bands.
• The frequency value range of the current band should be higher than
the previous band's setting value and lower than the next band's
setting value.
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
• When the Parametric EQ is adjusted, the adjustment for Graphic EQ
becomes ineffective.
Adjusting the Graphic Equalizer Curve (G-EQ)
When G-EQ is set in "Setting EQ mode" while the car is parked,
this item can be adjusted.
You can modify the equalizer settings to create a response curve
more appealing to your personal taste.
1
Touch [ ] of EQ Select after selecting G-EQ in
"Setting EQ mode".
The G-EQ list screen appears.
2
Adjust the G-EQ to your preference.
Band-1 (80 Hz) / Band-2 (250 Hz) / Band-3 (500 Hz) /
Band-4 (1,000 Hz) / Band-5 (4,000 Hz) / Band-6 (8,000 Hz) /
Band-7 (16,000 Hz)
Adjusting the Level
Touch [ ] or [ ] to adjust the level of selected band.
Adjustable level: –6 to +6 dB
3
To adjust another band, repeat step 2, and then
adjust all bands.
• When Graphic EQ is adjusted, the adjustment for Parametric EQ
becomes ineffective.
Adjusting Highpass Filter
When Defeat is set to OFF, touch the title bar of H.P.F. to adjust
screen.
Touch [ ] or [ ] of Front H.P.F. to adjust the front speaker.
Setting range: OFF, 60 Hz, 80 Hz, 100 Hz
Touch [ ] or [ ] of Rear H.P.F. to adjust the rear speaker.
Setting range: OFF, 60 Hz, 80 Hz, 100 Hz
• Select OFF when no adjustment is required.
36
-EN
Turning Defeat ON or OFF
Touch [ ] or [ ] of Defeat to set to ON or OFF.

Storing Settings in the Memory

Adjustment or setting contents of Time Correction and P/G-EQ can be
stored.
Contents that can be stored vary depends on the audio processor used.
1
Check whether the Defeat mode is OFF.
2
Touch [MEMORY] on the right side of bottom
screen.
3
Within 5 seconds, touch any one of the preset
buttons [P.SET 1] through [P.SET 6] on the bottom
screen.
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.

Calling up the Preset Memory

1
Check whether the Defeat mode is OFF.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] on the bottom display to select
the preset memory.
• It takes a few moments to call up the preset memory.

Search Function

1
Touch [ ] on the function guide while in the CD or
MP3/WMA/AAC or DivX® mode.
The search list screen is displayed.
Select a desired track or folder
Touch [ ] for direct playback.
When a hierarchical list is prepared, [
Touch [ ] to display the respective hierarchy list screens.
] will be displayed.