If A Menu Screen Appears - Alpine INA-W910R Owner's Manual

1
Press SOURCE/ on the unit.
The Source Select screen is displayed.
2
Touch [Disc].
The display shows the DISC mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
• The operation screen changes to the visual screen in the DVD or
Video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see "Switching Display Modes" on page 37.
Inserting/Ejecting a Disc
Refer to "Inserting/Ejecting a Disc" (page 18).
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• If the disc does not eject, press and hold
• Do not insert discs containing maps for the navigation system. Doing
so could result in damage.
• Refer also to "DVD Setup" (pages 38 to 42).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• "Can't Downmix" is displayed when a Downmix (multi-channel
signals are mixed into 2ch) prohibited section of a DVD-Audio disc is
played. In this case, only the Lch/Rch recorded on the disc is output
as sound. (The sound of Centre speaker, L-surround speaker,
R-surround speaker, and Subwoofer is not output.)
• While "Index Reading" is displayed by DivX®, the fast-forwarding/
fast-reversing and repeat functions, etc. cannot be used.

If a menu screen appears

On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
• To play back a DVD-Audio disc, set "VCAP" in "Setting the DVD-
Audio Playback Mode" (page 41).
Direct Menu Operations
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations
1 Touch any area on DVD mode screen to display the operation
keys.
2 Touch [Key].
The menu operation mode will be displayed.
for at least 3 seconds.
3 Select a desired menu item by touching [ ], [ ], [ ] or [ ].
4 Touch [Enter] to confirm the selected item.
• If no operation is performed for 5 seconds, the unit will return to the
DVD menu screen.
Numeric Keypad Input Operations
1 Touch any area on DVD mode screen to display the operation
keys.
2 Touch [Key].
The menu operation mode appears.
3 Touch [Key] again.
The numeric keypad input mode screen appears.
Touch [Return] to return to the previous display.
(Operation may not be possible, depending on the disc.)
27
-EN