Displaying The Numeric Keypad Input Screen; Radio; Listening To The Radio - Alpine INA-W910R Owner's Manual

Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD or Video
CD mode is selected for searching a title or chapter, and also for
entering a country code or password for the DVD setup item.
1
Touch [10KEY] on the main source screen.
2
Touch the desired numeric key.
Display example for numeric keypad
Input screen area.
Closes numeric keypad input screen.
All input numbers will be deleted.
Previous number will be deleted.
Input number is confirmed.
Numeric keypad.
The numeric keypad input screen closes if the area is
touched while displayed.
Changes to Image Brilliance adjustment screen directly.
(Adjustable only when the vehicle is in parking mode.)
3
Touch [Enter] to confirm your entry.
20
-EN

Radio

Display example for FM Radio main screen
Displays the preset number/frequency
1
[DX SEEK]* button: Displays the tuning mode selection
list.
2
[PTY SEARCH]* button: Search for a station by PTY
(Programme Type) Tuning, refer to "PTY (Programme
Type) Tuning" (page 22).
1
* The button displays the current tuning mode.
2
* The button displays only when the tuning mode of PTY is selected.

Listening to the Radio

1
Press SOURCE/ on the unit.
The Source Select screen is displayed.
2
Touch [Radio].
The radio mode is activated and the display changes to the
Radio Mode screen.
3
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
FM-1 FM-2 FM-3
4
Touch [DX SEEK] to choose the tuning mode.
DX SEEK Local SEEK
• There are two modes you can select for auto tuning, DX and Local:
- DX (Distance) mode;
Both strong and weak stations will be tuned in.
- Local mode;
Only strong stations will be tuned in.
The initial setting is DX.
5
Touch [ ], [ ] or [
radio frequency up or down respectively.
When touched and held in the manual mode, the frequency
changes continuously.
MW LW FM-1
MANUAL PTY
], [ ] to change the