Other Useful Features; Adjusting The Audio - Alpine INA-W910R Owner's Manual

\
Other Useful
Features

Adjusting the Audio

1
Press SOURCE/ on the unit.
The Source Select screen is displayed.
2
Touch [ ] on the main source screen.
The Setup Select screen is displayed.
3
Touch [ ] of Audio Setup.
The Audio Setup screen appears.
Display Example for Audio Setup Screen
• When the optional IMPRINT audio processor (PXA-H100) or an
external audio processor is connected, the "A.Processor" list is
displayed. For details on operation, refer to "IMPRINT Operation
(Optional)" (page 50) or "External Audio Processor Operation
(Optional)" (page 56).
• Touching [ ] or [ ] will scroll the list one line at a time.
• Touching [ ] or [ ] will scroll the list one page at a time.
• Touching [ ] to return to the previous screen.
... This item is controllable with the INA-W910R only.
... This item is available when the optional IMPRINT
audio processor (PXA-H100) is connected.
... This item is available when an External Audio
Processor is connected.
Adjusting Balance/Fader
Touch [ ] of Balance/Fader.
The display changes to the Balance/Fader adjusting
screen.
Display Example for Balance/Fader Screen
Adjusting the Fader
A
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
• If an IMPRINT audio processor (PXA-H100) is connected to this unit
and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.)
switch of the IMPRINT audio processor (PXA-H100) to 2.2ch
(3WAY), you cannot adjust the FADER mode. For details, refer to the
Owner's Manual of PXA-H100.
B Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
Adjusting the Balance/Fader Directly
C
Touch and move [ ] to a desired setting.
Or touch a desired setting range, and [
location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Adjusting Bass/Treble
You can change the bass or treble frequency emphasis
to create your own tonal preference.
Touch [ ] of Bass/Treble to adjust screen.
• Adjustment cannot be performed when Defeat is set to ON.
• If OFF is set in "Changing MultEQ mode" (page 50) when the
IMPRINT audio processor is connected, the list is not displayed.
Setting the Bass level
You can emphasise or weaken the bass frequency.
Touch [ ] or [ ] of Bass Level to select the desired bass level.
Setting range: –7 to +7
Setting the treble level
You can emphasise the treble frequency.
Touch [ ] or [ ] of Treble Level to select the desired treble
level.
Setting range: –7 to +7
] will move to that
33
-EN