Life Fitness T5-0 User Manual page 56

How To Use: T5-0, T5-5, & T7-0
How to Use the User Menu
continued from previous page
C TREAD SETTINGS
1 SLEEP MODE/ATTRACT MODE – User can set the amount of time before the console goes into
sleep mode or attract mode. When the console is in sleep mode, only one LED stays active to
signify the unit is still turned on. The purpose of sleep mode is to turn off the LEDs after the
treadmill has been idle so that the lighting is not bothersome. Sleep mode can be enabled and
disabled. Attract mode can be thought of as a screen saver for your treadmill, where lights on
the console move in a manner that attracts interest. Sleep mode and attract mode cannot both be
disabled or enabled. One mode must be chosen.
2 ENG/MET MODE – Allows user to set speed and distance units in either miles or kilometers.
3 PAUSE TIME – Allows the user to set the amount of time the unit can be inactive before it reverts
back to the User Menu.
4 BEEPS ON/OFF – Allows the user to turn the audio on or turn the audio off.
5 HR TELEMETRY – Allows the user to enable or disable the wireless chest strap heart rate.
6 MARATHON MODE – Allows user to enable or disable the Marathon Mode.
7 WORKOUT TIMER – Allows the user to set the workout time to count down to the time entered
or to count up to the time entered.
WATTS SETTING – Allows user to view watts output during a workout. (Watts is a measure of
8
power output.)
56
continued on next page