Table of Contents
Advertisement
3-9. Setting the Power Saving [Power Save]
This function allows you to set the monitor into the power saving mode according to the PC
status.
When the monitor enters the power saving mode, no image is displayed on the screen.
Attention
•
Turning off the main power switch or unplugging the power cord completely shuts off power supply to
the monitor.
•
Devices connected to the USB port (upstream and downstream) work when the monitor is in power
saving mode or when the power button of the monitor is Off. Therefore, power consumption of the
monitor varies with connected devices even in the power saving mode.
Power Save is compliant with the following standards for the respective signal inputs.
signal inputs
Analog signal
Digital signal
DVI
DisplayPort
Procedure
1.
Choose <PowerManager> from the Adjustment menu, and press
2.
Choose <Power Save> from the <PowerManager> menu, and press
3.
Select "On" or "Off" with
4.
Press
Power Saving System
The monitor enters the power saving mode in conjunction with the PC settings.
Operating
Power saving
3-10. Setting Power Indicator [Power Indicator]
The brightness of the power indicator (blue) when the screen is displayed can be adjusted (default
setting is set to light up when power is turned on, and brightness is set to 4).
Procedure
1.
Choose <PowerManager> from the Adjustment menu, and press
2.
Choose <Power Indicator> from the <PowerManager> menu, and press
3.
Select the indicator brightness "Off" or in the range from 1 to 7 with
desired.
4.
Press
or
to exit the adjustment.
PC
Operating
STAND-BY
Power saving
SUSPENDED
OFF
to exit the adjustment.
Chapter 3 Adjustment and Settings
Standard
VESA DPM
DVI DMPM
DisplayPort Standard V1.1a
.
Monitor Power
.
.
Indicator
Blue
Orange
.
.
or
as
1
Advertisement
Table of Contents
