Setting Power Indicator; Enabling / Disabling Automatic Brightness Adjustment; Auto Ecoview; Ecoview Optimizer 2 - Eizo FlexScan S2133-BK User Manual

Color lcd monitor
Table of Contents

Advertisement

4-2. Setting Power Indicator

This function allows you to set the power indicator (blue) ON / OFF in the monitor ON condition.
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "Power Indicator" in the "Monitor Settings" menu, and press
The "Power Indicator" menu appears.
3. Select "On" or "Off" with
4. Press
to exit.
4-3. Enabling / Disabling Automatic Brightness
Adjustment

Auto EcoView

The ambient light sensor on the front side of the monitor detects the environmental brightness to
adjust the screen brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the ambient light sensor on the lower side of the monitor when using the Auto EcoView
function.
Procedure
1. Press
.
2. Choose "Auto EcoView" in the "EcoView Menu" menu, and press
The "Auto EcoView" menu appears.
3. Select "High", "Standard", or "Off" with
4. Press
to exit.
Note
• As "Brightness" in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.
• Set to "High" if you feel a little brighter with "Standard" setting status.
• When "DICOM" is selected for the color mode, the Auto EcoView setting is turned "Off".

EcoView Optimizer 2

Using the EcoView Optimizer 2 function automatically adjusts the screen brightness according to the
white level of the input signal. This function can reduce the power consumption while maintaining the
brightness specified by the input signal.
Procedure
1. Press
.
2. Choose "EcoView Optimizer 2" in the "EcoView Menu" menu, and press
The "EcoView Optimizer 2" menu appears.
3. Select "On" or "Off" with
4. Press
to exit.
Note
• When "Movie" is selected from the FineContrast mode, the setting is turned "Off".
• When the EcoView Optimizer 2 function is "On", the appearance of pale color may change. If that bothers
you, set this function to "Off".
• When "DICOM" is selected for the color mode, the EcoView Optimizer 2 setting is turned "Off".
or
.
or
.
or
.
.
.
.
.
Chapter 4 Power Saving Functions
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexscan s2133

Table of Contents