Chapter 6 Power Saving Functions; Setting Power Save - Eizo ColorEdge CG247X User Manual

Chapter 6 Power Saving Functions

6-1. Setting Power Save

This function allows you to specify whether to set the monitor in the power saving mode, depending on
the state of an external device connected to it. When the monitor has shifted to the power saving mode,
the images on the screen are not displayed.
Attention
• When not using the monitor, you can turn off the main power supply or disconnect the power plug so that the
power is cut completely.
• When the monitor is in power saving mode, or when the monitor is turned off, devices connected to the USB
downstream port will still work. Therefore, power consumption of the monitor varies depending on the connected
devices, even in the power saving mode.
• Five seconds before the monitor enters the power saving mode, it displays a preliminary message.
Procedure
1. Choose "PowerManager" from the Adjustment menu, and press
2. Choose "Power Save" from "PowerManager", and press
3. Select "On" or "Off" using
4. Press
Power Saving System
When the external device connected is a PC
At DVI signal input
This monitor complies with the "DVI DMPM" standard.
At DisplayPort signal input
This monitor complies with the "DisplayPort Standard V1.1a".
PC
On
Power saving mode
When the external device connected is not a PC
Ext. Device
On
Power saving mode
Exiting power saving mode
If the monitor receives input, it automatically exits power saving mode and returns to the normal
display mode.
44
Chapter 6 Power Saving Functions
or .
after completing the setting.
Operation mode
Power saving mode
Operation mode
Power saving mode
Monitor Power indicator
Blue
Orange
Monitor Power indicator
Blue
Orange
.
.