Section 4: Operations; Operation Safety; Sanding Overview - Grizzly G0644 Owner's Manual

SECTION 4: OPERATIONS

Operation Safety

Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
-20-

Sanding Overview

To begin the sanding operation:
1.
Connect the sander to the compressed air,
and adjust the air regulator for 57 PSI.
2. Make sure the workpiece is clean and free
of any defects or foreign materials that might
cause kickback or damage the sander.
3.
Start the dust collection system.
4.
Set the elevation for the correct depth of cut
(Page 22).
5. Turn the sanding motor ON.
6. Turn the conveyor ON and correctly adjust
the conveyor speed for your operation
(Page 22).
7. Stand to the side of the sanding path, then
firmly hold the workpiece and ease it into the
sander at the same rate as the conveyor.
8.
While standing to the side of the sanding
path, let the conveyor feed the workpiece out
of the sander and into your hands.
G0644 15" Open-End Wide Belt Sander